DIY Painted Deer Skull

Leave a comment

I recently came across some deer skulls on craigslist. The person was selling items that were found in old storage abandoned lockers that his father started mass purchasing. I quickly scooped them up for projects. When I picked them up, the man cautiously asked me what I wanted 4 skulls for, and I told him I planned on cleaning them up and hanging them on the wall as decoration.

This is seriously such an easy color project to implement and it looks amazing hanging out your wall.

  1. If the skull is free of soft tissue, simply brush off dust, hair, or any other debris.
  2. Buy one spray can of your color of choice – I went with lime green!
  3. Use well-ventilated area when spraying. I have a yard, so I placed the skull on a flattened cardboard box in the grass.
  4. Spray one side, let it dry for an hour and then flip and spray the other side. I recommend 2 coats.
  5. For hanging, drill a small hole on the back side, under the large hole (foramen magnum) near the top of the head. Then insert an eye hook screw, which can then be hung simply with picture hanger hardware.

Advertisements

Upcycled Mid-Century Book Shelf

Leave a comment

A few months ago I found this adorable mid-century shelf at a thrift shop for $25. But I wasn’t a huge fan of the sloppy reddish brown paint and I abhorred the old dated wall paper, so I decided to freshen it up.

  1. First, I ripped out the wall paper. There was a ton of old dried glue residue still adhering so I used my small electric sander to easily sand away the adherent.
  2. After giving the shelf a wipe down to remove dust, I decided to spray paint it with Rust-Oleum in an heirloom white color. For maximum coverage, I ended up needing 4 cans, so I recommend going with a small can of paint, if you take on a similar project.
  3. Next I decided to paint the backboard with a pop of color: orange. Cream and orange look beautiful together and I wanted to give this shelf a more retro midcentury feel.
  4. I taped off the edge around the back board and then used a 4-inch cabinet/door roller to cover main areas and a small paint brush for the edges.
  5. After letting this dry, I removed the tape, touched up areas where some bleeding had occurred.
  6. Finally I used a spray sealant as a fixative, but I will end up covering the whole shelf in a 1-2 layers of polyacrylic ( my favorite sealant – it doesn’t yellow furniture over time) to ensure the paint doesn’t scrape off with use.

Now it’s time to fill this babe with vintage chotskies and lovely books!

Finished Shelf

Finished Shelf

Before & After

Merry ReXmas, everyone!

Leave a comment

The other day I wanted to make a simple gift for my boyfriend that represented this holiday season. I found a plain pint glass for $1 and decided to use my glass etching acid to transfer my custom-drawn design onto the glass. For the past 4 years, we have chosen a theme for our tree and this season was dinosaurs! So what better design than a christmas dinosaur. And so this is what I created:

Glass

Dino-mite! Watching Scrooged with Bill Murray in the background.

It was pretty easy and fun to do, so I think I will start offering custom designs on Etsy and am considering getting a electronic vinyl cutter to ease the whole process.

Mid-century Chair Rehab

Leave a comment

Last week I posted about the table and chairs I had just scored from the local thrift shop. Here is a peek at one of the finished chairs compared to its original state! I love before and after shots! After stripping stain and varnish, reupholstering the seats, staining, and applying polyurethane, the chairs are done. I especially enjoy being able to see the wood grain in the chairs.

Before & After

Next, I will post a step by step how-to on refinishing wood furniture.

How to Wrap Small Holiday Gifts Like Candy!

Leave a comment

I love wrapping presents. Probably more than I enjoy finding gifts for people. Therefore, I love different kinds of wrapping paper, not just holiday-themed varieties.

A few years ago, I got the idea to wrap small presents to give the illusion of a piece of candy. It’s pretty simple and looks super cute:

What you’ll need:

  • Paper towel roll
  • Wrapping paper
  • Ribbon
  • Tape
  • Scissors

The present above was a pair of earrings for my boyfriend’s sister. For jewelry, most pieces come in a box, nestled in some sort of soft, fluffy insert. If you have that, wrap your jewelry within the insert so nothing gets scuffed or rattles. Otherwise you can use tissue paper or even newspaper to pad your gift item. Next cut off a small piece of paper towel roll that’s sized to fit your item. Place the item into the paper towel roll and cover with a rectangular piece of gift paper, enough that it hangs about 3 inches over each end of the roll. Tape the paper together on the roll, and then twist each end and tie off with ribbon. Finally use one of the blade edges of your scissors to curl the ribbon.

Voila!

Thrifty Find: Mid-century Table and Chairs

Leave a comment

A few weeks ago I needed to kill some time before meeting a friend, so naturally I found the closest Goodwill and perused the store. In the back I found a table and two chairs (the third tucked away in the back). I immediately wanted the table, with it’s mid-century style and sleek legs. The chairs…not so much. Only because they looked so worn. But with a price tag of $12.99, who could argue. Since I had to meet my friend, and wasn’t sure if it would fit in my car, I decided to come back in the afternoon and take another look at it.

This is the photo I texted to my boyfriend to see what he thought before purchasing.

As soon as I arrived back at the store, I beelined toward the table only to see an old woman speaking to an employee about it. I was so sad! I asked if she was definitely purchasing the table, and told her about how I had seen it that morning but planned on returning to buy it. She informed me she was mostly interested in the chairs, and could live without the table, and even offered to buy everything and give me the table. I was incredibly happy, and we talked for a little while in the store. The woman said she was just going to put these in an apartment for visiting guests, explaining how easy it would be to update the chairs and reupholster them. She kept asking me if I was sure that I didn’t want to just buy everything. It didn’t take much convincing, and we finally came to the agreement that I would just buy the table and chairs since I didn’t have much money and needed a dining room table.

Stay tuned, as I chronicle this refinishing project.

DIY Jewelry Organizer

2 Comments

Before Pinterest was around I got the idea to use a cork board as a jewelry organizer. Brilliant! And cheap! I just hung the board, tacked some pins and push pins and voila, I had a cheap and easy organizer.

But that wasn’t creative enough. I recently saw a pin for framed cork boards, which got my gears going. I liked the idea, but the main thing that had always bothered me about my one cork board was the tears in it (I found it up for grabs outside a professor’s office). In an attempt to mask the marred material, I wanted to cover it in fabric. Nothing fancy, just a plain color. After picking up a light shade of teal, I decided to paint the wood frame in a bold color.

A few steps in the process.

What you’ll need:

  1. Cork board in frame
  2. Acrylic paint or spray paint
  3. Fabric (the size of cork board)
  4. Putty or palette knife (or a thin plastic knife could do)
  5. Thick cardstock or painters tape
  6. Pins

First cut your fabric piece slightly smaller than the size of the frame. Next, with your putty knife, begin wedging fabric under the frame. I started on one side and then worked my around back to where I started, ensuring to keep the fabric taught as I went.

I originally wanted to remove the frame and pull the fabric to the back and place the frame back on, but my frames were all fastened with large pieces of metal fasteners that I couldn’t remove without damaging the integrity of the wood. So I decided to use a putty knife to wedge the fabric under the edges of the frame. If you find you can pull the frame off, you should paint it before reframing the fabric-covered board. The steps below do no require fram removal.

Now that your fabric is in place, you’re ready to paint the frame. To protect the fabric, I wedged thick paper under the inner frame edges and picked a bright color, orange in this case. I found a tube or orange acrylic paint and coated it twice so the wood was no longer visible beneath.

If you’re worried about your fabric staying put, place short pins (I actually used jewelry wire cutters to shorten the pins I had) in the fabric-covered corners.

Let it dry 30 minutes to an hour, then arrange your pins (always at an angle to ensure jewelry doesn’t fall). As you can see below, I designated my top row for long, thin earrings, and my second row for wide ones, with the pins spaced further apart. Finally place your jewelry on the board and you are done! Hang in an easy access place.

Finished jewelry organizer